Control Panel
13
Getting to Know
Your Machine
- Press this key when you want to stop
telecommunication, registration
operation, or audible tone.
- Used to make copies and set
operations. (See page 70)
- Use this key when resetting all
the previously set functions.
Used for the following:
- Start or select the function.
- Search for a station name.
(See pages 50 and 55)
- Adjust the monitor and ringer volume.
(See page 25)
- Move the cursor while entering numbers
and characters.
- Search the station name for Directory
Search Dialing.
- Confirm the entered station for multi-station
communication.
- Confirm the current communication modes
(e.g. Page number, ID, Dialed Telephone
number, File number) when the unit is ON LINE.
One-Touch Keys (01-28)
- Used for One-Touch Dialing. (See pages 49 and 53)
Program Keys (P1-P4)
- Used to record long dialing procedures or Group Dialing Number keys. (See pages 76 to 81)
Character Keys
- The One-Touch Keys and Program Keys are serve as character and symbol input keys which
are used to record your LOGO, character ID and station name.
- Used to enter a symbol for LOGO, character ID and station name.
Use or to select the symbols.
- Used to insert a space while entering LOGO, character ID and station name.
- Used to switch between upper and lower character set.
To Next Page
Loading...
