Technical Information
32 -
E
NGLISH
Appendix
Specications
Power supply AC 100 - 240 V 50 Hz/60 Hz
Power consumption
Less than 240 W
During standby (when fan is stopped): 0.08 W (at 220 V)
Amps 3.0 A - 1.5 A
LCD panel
Panel size (diagonal) 0.74 type (17.78 mm)
Aspect ratio 16:9
Display method 3 transparent LCD panels (RGB)
Drive method Active matrix method
Pixels 2 073 600 (1 920 × 1 080) × 3 panels
Lens
Motorised zoom (2 ×)/Motorised focus
F 1.9 - 3.2, f 22.4 mm - 44.8 mm
Lamp UHM lamp (170 W)
Luminosity
*1
1 600 lm
Operating environment
Temperature
0 °C - 40 °C (32 °F - 104 °F)
When the HIGH ALTITUDE MODE
(See the functional instructions
that is in the provided CD-ROM.)
is set to ON: 0 °C - 35 °C
(32 °F - 95 °F)
Humidity 20 % - 80 % (no condensation)
Scanning
frequency
*2
(for RGB signal)
Horizontal scanning
frequency
30 kHz - 70 kHz
Vertical scanning
frequency
50 Hz - 87 Hz
Dot clock frequency Less than 150 MHz
COMPONENT (YP
B
P
R
) signals
525i (480i), 525p (480p), 625i (576i), 625p (576p), 750 (720)/60p,
750 (720)/50p, 1 125 (1 080)/60i, 1 125 (1 080)/50i, 1 125 (1 080)/60p,
1 125 (1 080)/50p, 1 125 (1 080)/24p
Colour system 7 (NTSC/NTSC 4.43/PAL/PAL-M/PAL-N/PAL60/SECAM)
Projection size 40" - 300" (1 016 mm - 7 620 mm)
Throw distance 1.2 m - 18 m (3'11" - 59')
Installation
FRONT/DESK, FRONT/CEILING, REAR/DESK, REAR/CEILING
(Menu selection method)
Measurement, measuring conditions and method of notation all comply with ISO 21118 international *1.
standards.
See “List of compatible signals” on page *2. 31 for available signals.
To Next Page
Loading...
