Panasonic PT-CW230E - Adjusting Projector Tilt and Height; Front Adjustable Feet Adjustment; Adjustment Notes and Warnings

-22-
Mechanical Disassembly
n Line filter board removal
1. Remove 2 screw A(M3x6) to remove the focus lever cover.
2. Remove 3 screws B(M3x8) to remove the line filter shield.
3. Remove 2 screws C(T3x8) to remove the line filter board and
insulation sheet.
B
Focus lever cover
Line filter shield
Fig.6
B
B
A
C
C
Insulation sheet
Line filter board
Spacer
sheet
(M2.6x6)x1
A
Wiring of cables
Dress the cables into the guides on the cabinet bottom as shown in the figure below.
Lamp socket
Trigger box
Ferrite core
SW902
Ballast board
Guide
Guide
Guide
Guide