1. The left side is adjusted straight by KEYSTONE.
2. The right side is adjusted straight by SUB KEYSTONE.
Note:
·
SUB KEYSTONE is a supplementary adjustment function and there is no guaranty of completely functioning. Use it
within the range where the trouble such as deforming the shape of the image does not occur.
4.3.3. Test Pattern Addition
"Red & Blue", "Whole red", "Whole green", "Whole blue", "Whole cyan", "Whole magenta" and "Whole yellow" patterns are added
to the test pattern.
"Red & Blue" is used for CW INDEX adjustment.
4.3.4. Ye MODULATE Addition
When the PICTURE MODE menu is displayed, it is enabled to be adjusted with the ENTER button.
·
ON: Validates Ye MODULATE function.
·
OFF: Invalidates Ye MODULATE function.
4.3.5. FRAME LOCK
When the input signal is RGB, FRAME LOCK is added to the POSITION menu.
4.3.6. ADVANCED MENU Addition
The following 3 items are added to ADVANCED MENU.
1. 480i SD
When non-standard signal of 480i/576i is inputted (AV amplifier, etc.), synchronization might be disordered according to
connected equipment. In this case, set 480i SD to ON.
2. 480p OS
When 480p/576p is received, aliasing noise (longitudinal striated beat noise) might be generated according to connected
equipment. In this case, set 480p OS to ON. However, the resolution decreases a little.
12
PT-D5700U / PT-D5700E / PT-D5700UL / PT-D5700EL / PT-DW5100U / PT-DW5100E / PT-DW5100UL / PT-DW5100EL
To Next Page
Loading...
