34
How to install and remove the projection lens (optional)
How to install the
projection lens
While pressing the lock button on the
projection lens cover, pull the cover
forward to remove it.
Pull and remove the dustproof sheet on
the back of the projection lens cover.
Align the mark (orange) on the
projection lens with the mark on the
projector ( ), and then insert the
lens and turn it clockwise until it clicks
into place.
Insert the tab on the projection lens
cover into the projector, and mount the
projection lens cover while pressing
the lock button.
How to remove the
projection lens
While pressing the lock button on the
projection lens cover, pull the cover
forward to remove it.
While holding down the lock button,
turn the projection lens
counterclockwise, and then pull it off.
Lens cover’s lock button Lens cover’s lock button
Mark (orange)
Lens cover’s lock button
Lens cover’s tab
Projection lens lock button
To Next Page
Loading...
