Lamp
MULTIPLE SYSTEM APPLIANCE
UNIVERSAL DESIGN
Easy lamp replacement
Other features
You can remove the back cover by removing a
single screw. This makes it easy to replace a
lamp, even if the projector is suspended from
the ceiling or
tucked in a
hard-to-reach
space.
Grooved for easy handling
Optional accessories
Grooves on all four sides of the projector's
bottom let you get a firm, comfortable grip on
the unit and move it safely.
Built-in multi-screen support system
The PT-DW10000E can project large, multi-screen
images without any additional equipment. Up to 100
units (10 x 10) can be edge-blended at a time.
Multiple terminals including DVI-D and LAN slots
Multi-screen processor
When several units are used together, this function
corrects for slight variations in the colour reproduction
range of individual projectors. The PC software assures
easy, accurate control. Independent, 7-axis adjustment
(red, green, blue, yellow, magenta, cyan, white) ensures
high precision and minimises colour variations.
Colour matching
The edges of adjacent screens can be blended and
their luminance controlled. For example, the adjoining
edges in a 2x2 multi-screen system can be blended to
create a smooth, seamless image.
The PT-DW10000E comes equipped with DVI-D and LAN
(PJ-Link™) slots. It also features an array of terminals,
including two RGB inputs, a 5-BNC connector and D-
sub HD 15-pin, serial in/out, S-video input, two remote
inputs, and one remote out. In addition to offering DVI-D
control, the PT-DW10000E is HDCP*-compliant and
thus meets a broad range of projection needs.
*High-Bandwidth Digital Content Protection
•Mechanical lens shutter •Picture in picture
(main/sub input source combinations possible
only when using computer and video) •Anti-theft
features with chain opening •ID assignment for
up to 64 units •Coordinated groups •Digital
vertical keystone correction •Built-in test
pattern •Selectable 9-language on-screen menu
(English, German, French, Spanish, Italian,
Russian, Japanese, Chinese, Korean)
Edge blending
The lens can also be adjusted using the lens
adjustment direct key that was newly added to
the remote control.
Blind touch operation key/
New remote control
The keys have pits
and projections
that let you
operate the
projector by blind
touch. A light can
also be turned on
to illuminate the control panel, for easy
operation in a darkened room. The wireless
operation range has been extended to 30 m,
giving you control from a greater distance.
Thanks to the backlight, you can check all the
keys on the remote control even in the dark.
Replacement lamp unit
ET-LAD10000
ET-LAD10000F (four pack)
SD-SDI Input signal board
ET-MD77SD1
HD/SD Input signal board
ET-MD77SD3
DVI-D Input signal board
ET-MD77DV
Zoom lens
ET-D75LE6 (0.9 - 1.1:1)
ET-D75LE1 (1.4 - 1.8:1)
ET-D75LE2 (1.8 - 2.8:1)
ET-D75LE3 (2.8 - 4.6:1)
ET-D75LE4 (4.6 - 7.4:1)
ET-D75LE8 (7.3 - 13.8:1)
Fixed focus lens
ET-D75LE5 (0.7:1)
ET-HAD100ET-PFD100
Lens
Input signal board*
Frame
High-ceiling mount bracket
ET-PKD100H
Low-ceiling mount bracket
ET-PKD100S
Ceiling mount bracket
Carrying handle
ET-D75LE1
ET-LAD10000
With
edge blending
Without
edge blending
Overlapping image edges
Source
PT-DW10000E
PT-DW10000E
Colour matching
Edge blending
*When edge blending and colour matching are set, the brightness and colour balance at the boundaries where screens are joined
may lack uniformity due to differences in the uniformity of the screen gain directivity, the brightness of each lamp mode, etc.
*The LAN terminal on each board, when mounted, cannot be used because the LAN terminal on the main unit has priority.
Panasonic works from every angle to minimise
environmental impact in the product design, production
and delivery processes, and in the performance of the
product during its life cycle. The PT-DW10000E reflects
the following ecological considerations.
•Lead-free solder is used to mount components to the printed
circuit boards.
•The non-coated cabinet enables easy recycling.
•Lamp power switching further reduces power consumption.
•
Auto Power Save activates standby mode when no signal is input.
•The packing case and operating manual are made from
recycled paper.
Ecological-conscious design
To Next Page
Loading...
