To Next PageTo Next PageWhy video from HDMI compatible device does not appear or it appears jumbled on my Panasonic Projector?
If video from an HDMI compatible device doesn't appear or appears jumbled on your Panasonic Projector, consider these solutions: Ensure the HDMI cable is securely connected. Try turning the power of both the projector and the external device off and on. Verify that the input signal is compatible with the projector.
What to do if the DIGITAL LINK input image is not displayed on Panasonic Projector?
If the DIGITAL LINK input image is not displayed on your Panasonic Projector, check if the connections between the twisted-pair-cable transmitter and the projector or an external device are correctly done. Also, check if [DIGITAL LINK MODE] is set to [AUTO] or [DIGITAL LINK], and ensure it is not set to [ETHERNET]. Finally, verify that the input signal is compatible with a twisted-pair-cable transmitter.
Why image does not display correctly on Panasonic PT-DZ870U Projector?
If the image isn't displaying correctly on your Panasonic Projector, ensure the [SYSTEM SELECTOR] selection is set correctly. Check for any problems with the video tape or other image sources. Verify that the input signal is compatible with the projector.
How to display image from a computer on Panasonic PT-DZ870U?
If the image from your computer isn't appearing on the Panasonic Projector, consider these points: Use a D-Sub cable that is 10 m (32'10") or shorter. Check the external video output settings on your laptop. These settings may be switched by pressing “Fn” + “F3” or “Fn” + “F10” simultaneously, but the method varies depending on the computer type, so refer to your computer's user manual.
How to fix a fuzzy image on Panasonic Projector?
To resolve a fuzzy image on your Panasonic Projector, try the following: Ensure the lens focus is set correctly and the projection distance is appropriate. Check if the lens is dirty and clean it if necessary. Also, verify that the projector is installed perpendicular to the screen.
What to do if no image appears on Panasonic Projector?
If no image appears on your Panasonic Projector, consider the following: Check that connections to external devices are correctly performed and the input selection setting is correct. Ensure the [BRIGHTNESS] adjustment isn't at a minimum. Verify the external device connected to the projector is working correctly and that the shutter function isn't in use. Finally, make sure the lens cover is removed.
Why is my Panasonic Projector remote control not responding?
If your Panasonic Projector remote isn't working, check these potential causes: Ensure the batteries aren't depleted and are inserted with the correct polarity. Make sure there are no obstructions between the remote and the projector's signal receiver. Verify the remote is within its effective range. Also, check if other light sources are interfering with the signal. Confirm that the [REMOTE CONTROL] setting in [CONTROL DEVICE SETUP] isn't set to [DISABLE], and that the terminal isn't being used for contact control. Finally, ensure the ID number setting operation is correct.
General| Brightness | 8500 lumens |
|---|---|
| Light Source | Lamp |
| Max Resolution | 1920 x 1200 (WUXGA) |
| Projection Size | 40 - 600 inches |
| Resolution | 1920 x 1200 |
| Connectivity | HDMI, DVI-D, RS-232C, LAN |
| Lamp Type | UHM Lamp |
| Power Consumption | 450W (Normal mode), 380W (Eco mode) |
