Panasonic PT-MZ670L

Chapter 4 Settings — [NETWORK/USB] menu
150 - ENGLISH
4) Press qw to select an item.
f The items will switch each time you press the button.
[OFF]
Disables the moderator mode.
Number of device that can connect to the projector and display the image is restricted to one.
[ON]
Enables the moderator mode.
Select this item when the moderator is to operate the projector and specify the device to display the
screen image from the multiple devices displayed in the standby screen.
Note
f When [ON] is set, cut-in of connection by other user is not possible.
f For how to operate the moderator mode in the MIRRORING input, refer to “Projecting with MIRRORING input” (x page 181).
Setting [CUT IN]
Sets if the cut-in of connection by other user when the projector is displaying the screen of the device for specic
user is allowed or not.
1) Press as to select [MIRRORING].
2) Press the <ENTER> button.
f The [MIRRORING] screen is displayed.
3) Press as to select [CUT IN].
4) Press qw to select an item.
f The items will switch each time you press the button.
[ON]
Select this item when allowing the cut-in.
Clears the connection with the current device, switches the connection to the device with new
connection request, and displays that image.
[OFF]
Select this item when prohibiting the cut-in.
Maintains the connection with the current device.
Note
f When [MODERATOR MODE] is set to [ON], [CUT IN] cannot be set.
[NETWORK STATUS]
Display the status of the projector network.
1) Press as to select [NETWORK STATUS].
2) Press the <ENTER> button.
f The [NETWORK STATUS] screen is displayed.
3) Press qw to switch the display screen.
f The page will change each time you press the button.
[WIRED LAN] (page 1/3), [WIRELESS LAN] (page 2/3), [WIRELESS LAN] (page 3/3)
[WIRED LAN]
Displays the network information of the wired LAN set on the projector.
[DHCP] Displays the status of use of DHCP server.
[IP ADDRESS] Displays the [IP ADDRESS].
[SUBNET MASK] Displays the [SUBNET MASK].
[DEFAULT GATEWAY] Displays the [DEFAULT GATEWAY].
[DNS1] Displays the address of the preferred DNS server.
[DNS2] Displays the address of the alternate DNS server.
[MAC ADDRESS] Displays the [MAC ADDRESS] of wired LAN.
[EAP] Displays the type of EAP.