Versatile First-Time and Replacement
Installations
s 2× Zoom Lens: For a 120-inch-diagonal
wide screen, the projection distance extends
from approximately 3.9 m (12.8 ft) to approx-
imately 7.8 m (25.7 ft).
s Horizontal/Vertical Lens Shift: The wide
shift range accommodates various room sizes
and shapes. When lights
or ventilation holes are
located in the ceiling
mounting site, you can
simply relocate the pro-
jector to avoid them.
s Flexible 360-Degree Installation: The pro-
jectors can be rotated
vertically. This means
you can install one at
any up-and-down angle
you want, to accommo-
date different installa-
tion conditions.
s Lens-Centered Design: A lens-centered,
symmetrical design provides ease of
installation, eliminating
the need for any spe-
cial considerations
when planning the
installation site.
DIGITAL LINK Transmits Digital Signals up
to 100 m (328 ft) with a Single Cable
*
2
s Optional ET-YFB100G Digital Interface Box
for Easy Setup: By combining the optional
ET-YFB100G Digital Interface Box, with its
HDMI and other input terminals, uncom-
pressed HD digital video, audio and control
signals can be transmitted up to 100 m
(328 ft) over a single LAN cable.
*
2
It allows
projector connection with only one cable,
making it ideal for ceiling-mounted and other
permanent installations. Also, because control
signals can be simultaneously transmitted, the
ET-YFB100G input signal can easily be
switched with the wireless remote control that
is included with the projector. The projector
can be controlled by either serial or LAN
communication.
s Also Supports Other Manufacturers’
Peripheral Equipment: DIGITAL LINK is an
original function added to technology based
on the transmission standards used in Crest-
ron’s DigitalMedia 8G+, Extron’s XTP Sys-
tems, etc. Signals from the ET-YFB100G can
also be relayed to a non-DIGITAL LINK-ready
projector by using another manufacturer’s
equipment based on the same technology.
*
8
Abundant Connection Terminals,
Including HDMI
Interfaces include HDMI and DVI-I inputs. The
serial terminal (RS-232C) has an Emulate func-
tion that lets you continue using existing control
systems when replacing previous Panasonic
models. It is also possible to output audio dur-
ing
STANDBY MODE.
*
9
This is convenient when
connecting an external audio system through the
projector.
*
10
A closed caption decoder is built in.
Easy Remote Monitoring and Control
over a LAN
Web browser on a computer connected through
a wired LAN system lets you remotely operate
projectors and check their status. An e-mail
messaging function can also notify you the
overall projector status. In addition, Multi
Projector Monitoring and Control Software Ver.
2.8 is available for monitoring and controlling
multiple Panasonic projectors from a single PC.
The wired LAN terminal is compatible with
PJLink
™
(class 1), an open protocol that is used
by many manufacturers, to enable integrated
control of systems that contain different brands
of projectors.
Compatible with Crestron RoomView
™
The LAN terminal allows a computer connected
to the network to use Crestron RoomView
™
application software to manage and control
system devices.
DIGITAL LINK
Digital Interface Box
ET-YFB100G
1-Chip DLP
™
Projector
PT-RZ370/RW330
Input selection and other ET-YFB100G
operations can be performed with the
projector’s remote control.
CAT5e (STP) cable or higher: Video, audio
and control signals (up to 100 m / 328 ft)
Document
camera
Speaker
Notebook PCDesktop PCVCRHD visual
communication
system
Blu-ray disc
player
VideoRGB signalRGB signal
S-Video/
audio signal
HDMI signal
(video/audio)
HDMI signal
(video/audio)
120-inch
wide screen
To Next Page
Loading...
