Panasonic PT-TX340

86 - ENGLISH
[General Setup] page
Change the password of web control function, turn on or off the power, or switch the input.
1 [Enter Old password]
Enters the congured password.
2 [Enter New password]
Enters the new password.
3 [Conrm New password]
Enters the desired new password again for
conrmation.
4 [Apply]
Updates the settings.
5 [Power]
Turns on/off the power.
6 [Source Select]
Switches the input source of the projector.
[Picture Setup] page
1 [Brightness]
Adjusts the brightness of the projected image.
2 [Contrast]
Adjusts the contrast of the projected image.
3 [Sharpness]
Adjusts the sharpness of the projected image.
4 [Color]
Adjusts the color saturation of the projected image.
5 [Tint]
Adjusts the skin tone of the projected image.
6 [Color temperature]
Adjusts the color temperature of the projected
image.
Chapter 5 Operation of Function - Web control function