Panasonic PV-DV103-K - Picture in Picture (Pinp)

42
Digital Features
3, 4JOG
KEY
1POWER
Picture in Picture (PinP)
You can display a PinP (still image) screen
on the Main Picture.
• PinP position is fixed at the bottom right of
the screen.
Note
1 Set POWER to CAMERA.
2 Press MENU to display the CAMERA
FUNCTIONS menu screen.
3 Rotate JOG KEY repeatedly to select
DIGITAL EFFECT , then press JOG
KEY to display the DIGITAL EFFECT
menu screen.
4 Press JOG KEY to select P-IN-P .
• Press MENU to exit this menu.
• “P-IN-P” will appear in the EVF or the
LCD monitor.
5 Aim at the scene you wish to place as
PinP, then press (P-IN-P) to freeze
the image.
6 Press (P-IN-P) again to place the
frozen image as PinP.
7 Press REC/PAUSE to record a scene
with PinP image.
• Press PHOTOSHOT to record a
scene with PinP image in PhotoShot
mode.
• Press (P-IN-P) again to remove
PinP image.
Main Picture
Picture in Picture
(PinP still image)
5, 6, 7
P-IN-P
PHOTOSHOT
7REC/
PAUSE
2MENU
DV103-K.p38-42.p65 2003/06/11, 13:1942