Panasonic PV-DV202 - Picture in Picture (PinP)

26
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
Special Effect Features
3, 4 JOG
KEY
1 POWER
Picture in Picture (PinP)
You can display a PinP (still image) screen
on the Main Picture.
• PinP position is fixed at the bottom right
of the screen.
Note
1 Set POWER to CAMERA.
2Press MENU to display the menu
screen.
3Rotate JOG KEY repeatedly to select
D.FUNCTION , then press JOG KEY
to display the CAMERA FUNCTION
menu screen.
4Press JOG KEY to select PinP .
• Press MENU twice to exit this menu.
•“PinP” will appear in the EVF or the
LCD monitor.
5Aim at the scene you wish to place as
PinP, then press
(CAMERA STILL)
to freeze the image.
6Press (CAMERA STILL) again to
place the frozen image as PinP.
7Press REC/PAUSE to record a scene
with PinP image.
• Press PHOTOSHOT to record a
scene with PinP image in PhotoShot
mode.
• Press
(CAMERA STILL) again to
remove PinP image.
Main Picture
Picture in Picture
(PinP still image)
5, 6, 7
CAMERA STILL
PHOTOSHOT
7 REC/
PAUSE
2 MENU
PV-DV52 / PV-DV52-S / PV-DV102 / PV-DV202 / PV-DV402
30