Panasonic PV-DV202 - Palmcorder USB Device Driver;SD Drive

75
PC Connection
Palmcorder USB Device Driver/SD Drive
3
2
USB Terminal
USB Terminal
1Turn on your PC.
2Set the Palmcorder POWER to M-CARD.
3Connect the Palmcorder to your PC (Windows) using the USB Cable (supplied).
•“CONNECT WITH PC” appears in the EVF or the LCD monitor.
• The “Found New Hardware Wizard” screen of Windows is displayed.
The following message is displayed. Even so, functionality confirmation has
been performed at our manufacturer.
Click [Continue Anyway] and proceed.
Follow the instructions as they appear on your PC screen.
USB Cable
(supplied)
For Windows XP users
Connection (for Palmcorder USB Device Driver/SD Drive)
Note
• When connecting for the first time using Windows XP, the OS installation CD may be
required.
Follow the instructions as they appear on your PC screen.
• For extended use, the AC Adaptor should be used as a power source.
1 32
2
PV-DV52 / PV-DV52-S / PV-DV102 / PV-DV202 / PV-DV402
79