8.4. Disassembly Procedures Mecha. Unit
Flow-Chart for Disassembly Procedure
No. Item / Part Fig. Removal (Screw, Connector, Flex. & Other)
1 Cassette Up Unit Fig.M1 It makes the mechanism position in Eject condition. (For Battery)
Fig.M2 Raise the Cassette Up Unit while pushing 2 ridbs.
Remove the Cassette Up Unit from rail department.
2 Cylinder Unit Fig.M3 1-Screw (A)
Fig.M4 3-Screw (B)
Cylinder Unit
Fig. M1
24
PV-GS90P