51
For Your Information
Replacing Clock/Remote Battery
Clock Battery
1While pinching 2 tabs, pull Battery
Tray out.
2Bend middle tab out and remove
Battery.
3Snap new Battery (⊕ mark down) into
Battery Tray.
• Do not reverse the polarity.
4Insert Battery Tray so the triangle
marks meet.
Note:
• Keep Battery out of children’s reach.
Swallowing it may be harmful.
• Improperly installed, discharged, or
missing battery causes “CLOCK
BATTERY” to appear when DISPLAY is
pressed.
• Battery life is approximately 5 years.
WARNING:
Replace battery with Panasonic PART NO. VSBW0004 (CR2025) only. Use of another
battery may present a risk of fire or explosion.
Caution: Battery may explode if mistreated. Dispose of used battery promptly. Keep
away from children. Do not recharge, disassemble or dispose of in fire.
The clock and remote batteries are pre-installed. Follow the steps below if replacement
becomes necessary.
Remote Battery
1A While pressing stopper tab,
B pull Battery Tray out.
2Insert battery into tray with ⊕ mark
down.
• Do not reverse the polarity.
3Replace Battery Tray.
Underside View
1
2
3
Tripod Mounting Hole
4
B
A
1
2
3
To Next Page
Loading...
