Panasonic RF-888JB - Handle Lock Button; Tuning Control;Tuning Dial; Power On;Off Timer; Telescopic Whip Antenna

@ Handle lock button
Push this button for detaching the handle. For details,
refer to page 8.
@® Tuning control/Tuning dial
Permit the unit to be tuned in any broadcast you want to
listen to.
@® Power on/off timer
Permits the unit to be automatically switched on or off
within the limits of about 120 minutes after the timer is
set.
* To switch on the unit:
Set the Power on/off switch® to the ON position. Turn
the Power on/off timer clockwise until the desired time,
after the lapse of which you want the unit to be auto-
matically switched on, appears in the center of the set
time indicator.
* To switch off the unit:
Set the Power on/off switch® to the OFF position. Turn
the Power on/off timer clockwise until the desired time,
after the lapse of which you want the unit to be auto-
matically switched off, appears in the center of the set
time indicator.
Notes: 1. Figures appearing in the set time indicator
express the time in minutes.
2. When turning the Power on/off timer@ to
set the automatic ‘‘switch-off’’ time, first go
beyond the target time by several minutes
and then return to the target time.
(Example)
Automatically switched on
90 minutes
\, Automatically switched off
OFF ELMAN Rc
90 minutes
@® Telescopic whip antenna
Pull out this antenna when listening to FM or SW (RF-
888JB/JBS only) broadcasts (Refer to page 6).
@® External power jack
Refer to page 3.
® Voltage selector
This
radio
is
set
at
the
factory
to
operate
at
220~240V
AC. If your household voltage is 110~125V AC, reset
this selector (refer to page 3).
@ AFC/DX-LOCAL selector switch
This is used only when listening to an FM or MW broad-
cast, and has nothing to do with the reception of SW
broadcasts.