11
TQBJ2029
Viewing available
information
You can view various information about
the DAB broadcast such as dynamic
label information (if available), signal
strength, program type, ensemble
name, channel number, bit rate, DAB
variant and date.
Press [DISPLAY] to view the available
information.
Press and hold [DISPLAY] to show the
default display.
FM radio
1 Press [SOURCE] to select “FM”.
2 Press [AUTO TUNE] to tune to a
station.
The unit stops tuning when it finds a
station.
Press [AUTOTUNE] again to tune to
the next station.
Manual tuning
Press [ TUNE/SELECT ] to tune to
the required station.
Presetting stations
You can preset up to 5 stations into the
direct preset buttons.
The first five stations are preset with a
default frequency for your convenience.
1 While listening to a station, press
and hold the desired direct preset
button ([1] to [5]).
2 Press [ENTER] to preset the
station.
█ Listening to a preset station
Press the direct preset button ([1] to
[5]) to listen to the preset station.
Viewing available
information
This unit can show the text data
transmitted by the radio data system
(RDS) available in some areas, such as
programme service, programme type
and date.
Press [DISPLAY].
Note:
RDS may not be available if reception is
poor.
D20BT_en.fm Page 11 Wednesday, December 28, 2016 2:55 PM
To Next Page
Loading...
