VQT5C48
7
7
ENGLISH
Inserting a battery
Insert the supplied or optional rechargeable battery (or any commercially
available alkaline dry cell battery) into the headset.
1
Open the battery lid of the headset
• Put your fingertip on the groove on the outside lid. Pull the lid towards
you.
• Press
on the inside lid, and lower the lid.
Outside
lid
Groove
Inside
lid
Outside
lid
Protrusion
2
Place the battery inside
• Check the battery terminals ( , ).
Make sure the
terminal goes in first.
AAA battery
3
Close the lid
• Lift up the inside lid. Press the protrusion
and close the lid securely.
• Close the outside lid. Press the lid
surface and close it securely.
■
Note
• Panasonic batteries are recommended if using commercially available
alkaline dry cell batteries.
• Using manganese dry cell batteries is not recommended as the battery life
is short.
Turning the power on/off
Press and hold the power button
for approximately 2 seconds.
• The power is turned on, and the LED
(blue) will light up once.
Power button
To turn the power off
• Press and hold the power button
for approximately 2 seconds.
■
Note
• When the headset is not operated for a certain period of time, the power
will automatically turn off. (See “Auto power off” (P. 13))
To Next Page
Loading...
