To Next PageTo Next PageHow to fix Panasonic RP-WFG20 Headphone when there is no sound?
If your Panasonic Headphone has no sound, consider the following: * Ensure the audio-visual equipment connected to the transmitter is turned on. * Verify the audio-visual equipment and the transmitter are correctly connected with the plug properly inserted. * Increase the volume of the connected audio-visual equipment. * Increase the volume on the headphone unit itself.
Why is my Panasonic RP-WFG20 Headphone sound distorted?
If the sound from your Panasonic Headphone is distorted, the input level of the audio signal might be too high. Try turning down the volume of the connected audio-visual equipment.
What to do if my Panasonic RP-WFG20 Headphone has excessive noise?
If your Panasonic Headphone has excessive noise, consider these possible solutions: 1. Check for any obstructions between the transmitter and the headphone unit. If there are any, remove the obstruction, move the transmitter, or change your listening location. 2. Other radio waves might be interfering with the transmitter's waves. In this case, change the transmitter channel with the [CHANNEL] switch and then press the [POWER /TUNING] button on the headphone unit to the position of least interference. 3. The input level of the audio signal might be too low. Try turning up the volume of the connected audio-visual equipment.
Learn how to correctly place the headphone unit on your head.
Step-by-step guide on removing and attaching headphone units to the receiver.
Explanation of bone conduction technology and its benefits.
Guidelines for safe handling of the AC adaptor, unit, and earpieces.
Critical safety advice regarding installation, ventilation, and electrical hazards.
Instructions on how to attach and use the headphones holder.
Critical safety warnings regarding handling and misuse of the rechargeable battery.
Precautions for keeping batteries away from children and handling fluid leaks.
General