Panasonic RQ-V190 - Special Features

■ Manual reverse
Select the playback side, forward or reverse, by
pressing the direction selector to "FWD” or
“REV”.
■ Tape selector
Set the selector to the appropriate position ac¬
cording to the type of tape being used.
CrOa | mtl| : Metal tape/high bias chromium tape
or equivalent
NOR: Low bias ferric oxide tape
■ Cassette tapes [c])
Cassette tapes, both recorded and unrecorded,
should not be stored in locations with high temper¬
ature, high humidity or direct sunlight. Never place
a recorded cassette near a magnetic source such
as a magnet or a TV set as this may affect tape
performance.
■ Cassette tapes exceeding 90 minutes
These tapes are handy for their long playback and
recording time but be careful about repeatedly
stopping and starting, rewinding and fast for¬
warding these tapes in short intervals as they are
thin, tend to stretch and may become entangled in
the machine.
■ ’Dolby NR switch
(Only for RQ-V200)
This unit includes Dolby noise reduction which
reduces the noise.
ON: To playback the tape recorded with Dolby
B-type noise reduction
OFF: For other tapes
* Dolby noise reduction manufactured under li¬
cense from Dolby Laboratories Licensing Cor¬
poration.
“DOLBY” and the double-D symbol □□ are trade¬
marks of Dolby Laboratories Licensing Corpo¬
ration.
SPECIAL FEATURES
■ XBS switch
XBS boosts the low frequency range, so that you
can fully enjoy the dynamic low sounds.