Note :
Before installing the CD servo P.C.B., move the optical pickup towards the outer edge from the
marking (black triangle).
[Otherwise, the detect switch (S701) mounted on the CD servo P.C.B. may be damaged.]
10. Schematic Diagram
(All schematic diagrams may be modified at any time with the development of new technology.)
Notes:
S703 Rest Switch
SW302 Function Switch
SW601 Auto Scan Switch
SW602 XBS/TONE/HES Switch
SW603 Play Mode Switch
SW604 Memory Switch
SW605 REV Skip Switch
SW606 FWD Skip Switch
SW607 Play/Pause Switch
SW608 CD Stop Switch
SW1001Record Switch
SW1002Leaf Switch
Battery Current:
Volume minimum :
119 mA (FM)
112 mA (AM)
187 mA (TAPE Playback)
169 mA (CD REC)
Volume maximum :
119 mA (FM)
112 mA (AM)
187 mA (FM RADIO REC)
181 mA (AM RADIO REC)
187 mA (TAPE Playback)
238 mA (CD REC)
- The voltage value and waveforms are the reference voltage of this
unit measured by DC electronic voltmeter (high impedance) and
oscilloscope on the basis of chassis. Accordingly, there may arise
some error in voltage values and waveforms depending upon the
internal impedance of the tester or the measuring unit.