To Next PageTo Next Page
Need help?Do you have a question about the Panasonic RX-DT770 and is the answer not in the manual?
Radio Specifications| FM frequency range | 87.9-107.9 MHz (200 kHz steps) |
|---|---|
| FM frequency range alternative | 87.5—108.0 MHz (100 kHz steps) |
| AM frequency range | 520—1710 kHz (10 kHz steps) |
CD Player Specifications| sampling frequency | 44.1 kHz |
|---|---|
| decoding | 16 bit linear |
| beam source wavelength | 780 nm |
Tape Recorder Specifications| track system | 4 track, 2 channel, stereo |
|---|---|
| frequency range | 50-13, 000 Hz |
| recording system | AC bias |
General Specifications| power requirement | AC 120 V, 60 Hz |
|---|---|
| power consumption | 58 W |
| battery | 12 V (Eight "D" size, R20/LR20 batteries) |
Weight and Dimensions| dimensions (WxHxD) | 658 x 264 x 261.2 mm |
|---|---|
| main unit dimensions (WxHxD) | 317 x 254 x 261.2 mm |
| weight | 7.1 kg |
How to connect the unit to AC power or operate using batteries.
Instructions for connecting speakers to the main unit.
Steps to disconnect speakers from the main unit.
How to insert, load, play, stop, pause, and resume tapes.
Steps to insert CDs and play a single disc.
Stopping, pausing, resuming, and selecting specific CDs.
How to play multiple CDs sequentially.
How to program specific tracks for playback order.
Managing programmed tracks, cancellation, and memory retention.
How to tune into pre-programmed radio stations.
How to tune into stations manually.
Setting, releasing, checking, and changing the sleep timer.
How to record CDs onto tape automatically.
Procedures for recording one or three CDs.
How to set up and start synchro recording from CD.
Recording another CD, stopping, pausing, and skipping tracks.
How recording continues automatically with the next CD.
How to tune into a radio station and record it.
How to copy tapes from one deck to another.
Starting, stopping, and pausing CD playback.
Solutions for general issues like no operation or error messages.
