7
RQTX1148
✒
NOTE about using a DualDisc
The digital audio content side of a DualDisc does not meet
the technical specifi cations of the Compact Disc Digital
Audio (CD-DA) format so playback may not be possible.
✒
NOTE on MP3
• Files are treated as tracks and folders are treated as
albums.
• This unit can access up to 999 tracks, 255 albums and 20
sessions.
• Disc must conform to ISO9660 level 1 or 2 (except for
extended formats).
• To play in a certain order, prefi x the folder and fi le names
with 3-digits numbers in the order you want to play them.
Limitations on MP3 play
• If you have recorded MP3 on the same disc as CD-DA,
only the format recorded in the fi rst session can be played.
• Some MP3s may not be played due to the condition of the
disc or recording.
• Recordings will not necessarily be played in the order you
recorded them.
✒
NOTE on CDs
Choose discs with this mark:
• This unit can access up to 99 tracks.
• This unit can play MP3 fi les and CD-DA format audio
CD-R/RW that have been fi nalised.
• It may not be able to play some CD-R/RW due to the
condition of the recording.
• Do not use irregularly shaped disc.
• Do not use disc with labels and stickers that are coming off
or with adhesive exuding from under labels and stickers.
• Do not attach extra labels or stickers on the disc.
• Do not write anything on the disc.
Using the FM/AM radio
Manual tuning
1 Press [FM/AM] to select “FM” or “AM”.
2 If “PGM” is displayed, press [TUNE MODE] to clear it.
3 Press [2/3] or [5/6] (main unit: [–/2] or
[6/+]) to select the frequency of the required station.
To tune automatically
Press and hold [2/3] or [5/6] until the frequency
starts changing rapidly. The unit begins auto tuning,
stopping when it fi nds a station.
• Auto tuning may not function when there is excessive
interference.
• To cancel auto tuning, press [2/3] or [5/6]
once again.
To improve reception
FM: Extend the whip antenna and adjust its direction.
AM: Adjust the position of the unit.
To improve FM sound quality
When “FM” is selected
Press [FM MODE] to display “MONO”.
To cancel
Press [FM MODE] again.
• MONO is also cancelled if the frequency is changed.
• Turn off “MONO” for normal listening.
Memory preset
Up to 16 stations each can be set in the FM and AM bands.
✒
Preparation
Press [FM/AM] to select “FM” or “AM”.
Automatic presetting
Press [AUTO PRESET] to start presetting.
The tuner presets all the stations it can receive into the
channels in ascending order. When fi nished, the last station
memorised is tuned in.
Manual presetting
1 Press [MANUAL PRESET].
“PGM” is displayed.
2 Within 10 seconds or so
Press [2/3] or [5/6] to tune to the required
station.
3 Press [MANUAL PRESET].
4 Press the numeric buttons to select a channel.
The station occupying a channel is erased if another station
is preset to that channel.
5 Repeat steps 2 to 4 to preset more stations.
Selecting a preset station
Press the numeric buttons to select a channel.
For channels 10 to 16 press [ 10], then the two digits.
OR
1 Press [TUNE MODE] to display “PGM”.
2 Press [2/3] or [5/6] (main unit: [–/2] or
[6/+]) to select the channel.
Preset channel
AM allocation setting
By main unit only
This system can also receive AM broadcasts allocated in
10 kHz steps.
To change the step from 9 kHz to 10 kHz
1 Press and hold [FM/AM].
After a few seconds the display changes to a fl ashing
display of the current minimum frequency.
2 Continue to hold down [FM/AM].
• When the minimum frequency changes, release the
button. To return to the original step, repeat the above
steps.
• After the setting is changed, any previously preset
frequency will be cleared.
RQTX1148-1B_gb.indd 7RQTX1148-1B_gb.indd 7 3/30/2010 10:21:32 AM3/30/2010 10:21:32 AM
To Next Page
Loading...
