36
Step 7 : Lift up to remove Main P.C.B..
Caution 1 : During assembling, ensure the Main P.C.B. is
seated properly on the Locator.
Caution 2 : During assembling, ensure the Main P.C.B. is
slot into the Front Panel Assembly.
8.16. Replacement of Transisor
(Q4107)
• Refer to “Disassembly of Main P.C.B.”
8.16.1. Disassembly of Transistor (Q4107)
Step 1 : Desolder pins of the Transistor (Q4107) on the solder
side of Main P.C.B..
Step 2 : Remove 1 screw.
To Next Page
Loading...
