Panasonic RX-ED707 - Page 14

Listening ee
ROT4598
Numbered buttons
BP/
SLEEP DISPLAY [FM MODE
| Listening to the Radio |
Preset tuning
Once stations have been programmed, they can easily be tuned
in.
Ten FM and ten AM stations can be programmed.
Programming stations
(Available only from the main unit)
Preset radio stations on the FM and AM band.
Press [TUNER BAND] to display “AM” or “FM”.
The display changes each time the button is pressed.
2| Press [+] or [—] to select the station.
3 Press [MEMORY æ CLEAR (CD)] once.
“Ged” flashes.
While “EA” is flashing,
Press [A/p PJ or [v//4<] to select the preset
channel to be programmed.
While “EXD” is flashing, Press [e MEMORY
æ CLEAR (CD)].
if the “CE” indicator goes out during programming, return to
step El
[A Repeat steps H to E to program other stations.
| Selecting the preset channel |
© Press [TUNER BAND] to display “AM”or “FM”.
© Select the preset channel. FE]
Ab»): Up
v/ keg: Down
To select a preset channel with the remote control
Press the numbered buttons. E)
To select number 10
[210}—[1]—[0]
To skip an unwanted preset channel
Example: If channel 3 is not needed
(D Select number 3 (steps (D and © above).
© Press [e MEMORY = CLEAR (CD)] (“EA flashes).
© While “EL” is flashing, press [4/11 or [v/a]
until “-~” is displayed.
12334556
eke De ee EEE
{ The display changes each time the button is pressed.)
@) Press [MEMORY = CLEAR (CD)].
_ The next time you select preset numbers, 3 is skipped.
14626465...
The cleared number can stil! be selected with the remote control’s
numbered buttons.