Panasonic RX-ED707 - Setting the Clock Se Oak Ie es; Selecting the Display 45650

| Setting the Clock |
The clock has a 12-hour display.
Example: Setting the clock to 4:20 P.M.;
EE Press (POWER bn].
(
This turns the unit on.)
p] Press [TOP PANEL OPEN A] to open top panel.
3 Press [ADJUST, CLOCK/TIMER].
“CLOCK” is displayed.
4 Press [+] or [—] to show desired time.
The time display can be changed in one minute units by tap-
ping the buttons, and quickly by holding down the buttons.
While the time display is flashing,
Press [ADJUST, CLOCK/TIMER].
The clock now starts operating, and the display retums to its
original status.
To display the clock (When the unit is on): FA
(Available only from the remote control)
Press [DISPLAY] when the unit is on.
Selecting the Display r
(Only from the remote control)
Press [DISPLAY] when the unit is on.
The display changes each time the button is pressed.
eWhen using the cassette
Tape counter
© Present time
When using the radio, CD or external unit
© Frequency/play status
@) Present time
Tape counter
“—-———” appears on the tape counter display when a cassette
has not been inserted.
asn asojag En