Panasonic RX-FT530 - Listening to Tapes; Single tape playback

|
Listening to Tapes
You can use normal tapes only.
You can use either deck 1 or deck 2 for tape playback by
following the same steps. (This page shows an example
using deck 2.}
Single tape playback E
SELECTOR
1 CT) |] Set SELECTOR to TAPE/@H3.
cory geo]
il
GSTOPEJECT
> |_| Press STOP/EJECT, and then in-
sert the tape.
Insert the cassette with the exposed
tape facing up.
Playback side
3 <Puy Press PLAY to start playback.
E
VOLUME F
“x, Adjust VOLUME and TONE.
` .
Cal WAR Low man
To stop the playback:
Press STOP/EJECT.
To briefly interrupt the playback:
Press PAUSE.
To resume playback, press PAUSE again.
Full auto stop:
When the tape reaches the end, the tape will automatically
stop.
To fast forward or rewind the tape E]
Press <€<4/CUE or »P/REV while the tape is
stopped.
The tape will start moving at high speed.
To stop the fast forward or rewind operation, press STOP/
EJECT.
To cue or review the tape E]
During playback, press and hold <<4/CUE or
> /REV.
The recorded sound on the tape can be monitored at high
speed.
When the button is released, normal playback will resume.
eT eer eter Ae meget ES eene ON e ae re e a ress ee s oer server
44/CUE, PP /REV
STOP/EJECT