Panasonic RX-FT530 - Making a Recording (deck 2 only); Recording from radio broadcasts; Recording via Built-in Microphone

Making a Recording (deck 2 only)
You can use normal tapes only.
The recording level is automatically adjusted.
Recording from radio broadcasts EA
OSTOPEJECT
1 Press STOP/EJECT of deck 2 to
|] insert the tape.
Recording side
Tune into the desired broadcast.
{Follow the procedure 1-4 of
“Listening to Radio Broad-
casts”’.)
L JRECORD
3 C] Press [i{aele)sis).
When recording AM broadcasts:
B.P selector can reduce unwanted beat signals (whistle)
which sometimes occur.
Set B.P to the position which gives best results.
To stop the recording:
Press STOP/EJECT.
To briefly interrupt recording:
Press PAUSE.
To resume recording, press PAUSE again.
Recording through the built-in
microphone E
1 ci n Set SELECTOR to TAPE/ 03.
m eE
p S |
2 Cir Set EDITING to MIC.
— J a y
MO Te
3 osor OFT Insert the tape into deck 2, and
[| [ ] press RAARD.
Pause button:
Before beginning a recording, first press and lock PAUSE.
Then press . (The tape will not move.)
When ready to record, press PAUSE to release it. This will
start tape movement for immediate recording. Do not use
PAUSE to stop the tape for a long period of time. i
Monitoring:
The monitor system enables you to listen, through the
speakers or headphones, to the sound as it is being re-
corded.
When recording from the built-in microphone the sound
being recorded cannot be monitored.