EasyManua.ls Logo

Panasonic SA-HT920P - Page 27

Panasonic SA-HT920P
150 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Note:
An error code will be canceled if a power supply is turned OFF.
*1: CPPM is the copy guard function beforehand written in the disk for protection of copyrights.
12.4 Last Error Code saved during NO PLAY
12.5 Service mode table 2
Pressing various button combinations on the player and remote control unit can activate the service modes.
Disc code
F103 Illegal highlight Position
Big possibility of disc specification violation during highlight
display
HIC Error
F4FF Force initialize failure (time out)
Micro computer error
F700 MBX overflow When replying message to disc manager
F701 Message command does not end Next message is sent before replying to disc manager
F702 Message command changes
Message is changed before it is sent as a reply to disc
manager
F880 Task number is not appropriate Message coming from a non-existing task
F890
Sending message when message is being sent
to AV task
Sending message to AV task
F891 Message couldn’t be sent to AV task Begin sending message to AV task
F893 FROM falsification
F894 EEPROM abnormality
F895 Language area abnormality
Firm version agreement check for factory preset setting
failure prevention
F896 No existence model
Firm version agreement check for factory preset setting
failure prevention
F897 Initialize is not completed
Initialize completion check for factory preset setting failure
prevention
F898 Disagreement of hardware and software
Unsuitable combination of AV DECORDER, SDRAM and
FLASH ROM
(firmware)
F8A0 Message command is not appropriate Begin sending message to AV task
Error
code
Error Content System computer Setting task
System computer
internal error code
F0BF
6) Cannot playback because physical layer
is not recognizable
PCND_NOPLAY
PHYSICAL 0x50
DriveManager
0xDOBF
F0C0
8) DVD: Cannot playback because it is not
DVD Video/Audio/VR
PCND_NOPLAY VIDEO
0x70
DiscManager
0xDOC0
F0C1
9) DVD: Prohibited by the restricted region
code
PCND_NOPLAY RCD
0x80
DiscManager
0xDOC1
F0C2 A) DVD: PAL restricted playback
PCND_NOPLAY PAL
0x90
DiscManager
0xDOC2
F0C3
B) DVD: Parental lock setting prohibits the
playback of the entire title
PCND_NOPLAY PTL
0xA0
DiscManager
0xDOC3
F0C4
C) VCD: Prohibited because it is in PHOTO
CD format
PCND_NOPLAY PHOTO
CD 0xB0
DiscManager
0xDOC4
F0C5
VCD/CD: Prohibited because it is CDROM
without CD-DA
PCND_NOPLAY CDROM
0xC0
DiscManager
0xDOC5

Related product manuals