- Important safety notice:
Components identified by mark have special characteristics
important for safety.
Furthermore, special parts which have purposes of fire-retardent
(resistors), high-quality sound (capacitors), low noise (resistors),
etc are used.
When replacing any of these components, be sure to use only
manufacturer’s specified parts shown in the parts list.
- The parenthesized indications in the Remarks columns specify the
areas or colour. (Refer to the cover page for area or colour)
Parts without these indications can be used for all areas.
- Warning: This product uses a laser diode. Refer to caution
statements on page 5.
ACTUNG:
- Die Lasereinheit nicht zerlegen.
- Die Lasereinheit darf nur gegen eine vom Hertsteller spezifizierte
Einheit ausgetauscht werden.
- Capacitor values are in microfarads ( F) unless specified
otherwise, P= Pico-farads (pF), F= Farads.
- Resistance values are in ohms, unless specified otherwise, 1K=
1,000 (OHM).
- The marking (RTL) indicates that the Retention Time is limited for
this items. After the discontinuation of this assembly in
production, the item will continue to be available for a specific
period of time. The retention period of a availability is dependent
on the type of assembly, and in accordance with the laws
governing part and product retention. After the end of this period,
the assembly will no longer be available.
- [M] Indicates in the Remarks columns indicates parts supplied by
MESA.
- The “(SF)” mark denotes the standard part.
- Reference for O/I book languages are as follows:
57
To Next Page
Loading...
