Step 1: Desolder the Power IC and Transistor terminals.
Steps 2 & 3: Remove the screws.
Step 4: Replacement of the Power IC (IC601) and Transistors
(Q601 & Q602).
Steps 5: Desolder the Power IC and Transistor terminals.
Steps 6 & 7: Remove the screws.
6.3. Main Component Replacement Procedures
6.3.1. Replac ement of the Power ICs and Transistors
12
SB-WA870EB / SB-WA870EG
To Next Page
Loading...
