Some chassis components may have sharp edges.
Be careful when disassembling and servicing.
6 Disassem bly Procedure
“ATTENTION SERVICER”
1. This section describes procedures for checking the operation of the major printed circuit boards and replacing the
main components.
2. For reassembly after operation checks or replacement, reverse the respective procedures.
Special reassembly procedures are described only when required.
3. Select items from the following index when checks or replacement are required.
Contents
·
Disassembly of the Speaker Unit
·
Main Component Replacement Procedures
6.1. Disassembly flow chart
The following chart is the procedure for disassembling the casing and inside parts for internal inspection when carrying out the
servicing.
To assemble the unit, reverse the steps shown in the chart below.
6
SB-WA870EB / SB-WA870EG
To Next Page
Loading...
