To Next PageTo Next PageWhy is the sound distorted during stereo broadcasts on my Panasonic SC-AK48 Stereo System?
If the sound during a stereo broadcast is highly distorted on your Panasonic Stereo System, there might be a building or mountain nearby. Use a high-grade outdoor antenna and install it in a good location, height, and orientation for reception.
Why does the TV picture disappear when using my Panasonic Stereo System?
If the picture on the TV disappears or stripes appear on the screen when using your Panasonic Stereo System, the antenna's location and orientation might be incorrect. If you're using an indoor antenna, try switching to an outdoor antenna.
Why won't my Panasonic Stereo System enter recording mode?
If the deck on your Panasonic Stereo System does not enter recording mode, the erase-prevention tabs might be removed from the cassette. Attach tape to cover the space left by removal of the erase-prevention tabs.
What does error code “F61” mean on my Panasonic SC-AK48 Stereo System?
If “F61” appears on the display of your Panasonic Stereo System and the speaker wires are not shorted, there is a power supply problem. Consult your dealer for assistance.
Amplifier Section| RMS power output (HIGH) | 40 W per channel (6 Ω) |
|---|---|
| RMS power output (MID) | 40 W per channel (6 Ω) |
| RMS power output (LOW) | 120 W per channel (6 Ω) |
| RMS power output (TOTAL) | 200 W per channel (6 Ω) |
| Input sensitivity AUX | 250 mV |
| Input impedance AUX | 13.9 kΩ |
FM Tuner Section| Frequency range | 87.50 – 108.00 MHz (50 kHz steps) |
|---|---|
| Sensitivity | 1.8 µV (IHF) |
| S/N 26 dB | 1.5 µV |
| Antenna terminal(s) | 75 Ω (unbalanced) |
AM Tuner Section| Frequency range | 522 – 1629 kHz (9 kHz steps) |
|---|---|
| Sensitivity S/N 20 dB at 999 kHz | 560 µV/m |
Cassette Deck Section| Track system | 4 track, 2 channel |
|---|---|
| Tape speed | 4.8 cm/s |
| Frequency response NORMAL (TYPE I) | 35 Hz – 14 kHz |
| Frequency response HIGH (TYPE II) | 35 Hz – 14 kHz |
| Wow and flutter | 0.18% (WRMS) |
| Fast forward and rewind time | Approx. 120 seconds with C-60 cassette tape |
CD Section| Sampling frequency | 44.1 kHz |
|---|---|
| Frequency response | 20 Hz – 20 kHz (+1 dB, –2 dB) |
| Beam source/wave length | Semiconductor laser/780 nm |
Speaker Section| Type | 4 way speaker system |
|---|---|
| Super woofer | 17 cm cone type |
| Woofer | 12 cm cone type |
| Tweeter | 6 cm ring shaped dome type |
| Super tweeter | Piezo type |
| Input power HIGH | 60 W (music) |
| Input power MID | 60 W (music) |
| Input power LOW | 200 W (music) |
| Output sound pressure level | 87 dB/W (1.0 m) |
| Cross over frequency | 150 Hz, 3.5 kHz |
| Frequency range | 40 Hz – 50 kHz (–16 dB) |
| Speaker dimensions | 250 x 348 x 292 mm |
| Speaker weight | 5.1 kg |
General| Power supply | AC 230 – 240 V, 50 Hz |
|---|---|
| Power consumption | 210 W |
| Power consumption in standby mode Eco mode on | 0.4 W |
| Power consumption in standby mode Eco mode off | 14 W |
| Dimensions | 270 x 331 x 338 mm |
| Weight | 8.8 kg |
Verify all supplied accessories are present and identify them for proper use and setup.
Learn optimal placement for performance and longevity, avoiding direct sunlight, heat, and humidity.
Understand voltage requirements and safe handling of the AC power cord to prevent shock or fire.
Detailed steps to safely replace the fuse in the UK mains plug, including fuse rating and safety warnings.
Proper battery insertion and guidelines for effective remote control operation.
Connect FM/AM antennas, speakers, and AC power lead following basic setup procedures.
Connect outdoor antennas and external audio/digital equipment for enhanced functionality.
Identify and understand the function of controls on the main unit and center console.
Proper techniques for handling, cleaning, and storing CDs to prevent damage and ensure playback.
Understand deck preparation, tape types for recording, and performing tape-to-tape dubbing.
Transfer audio from CDs to tape, including selecting discs and stopping recording.
Program the system to turn on/off or record at set times, managing start/finish times and sources.
Verify timer settings, source, volume, and confirm timer status for play/record functions.
Resolve common problems like display issues, sound reversal, and broadcast reception difficulties.
Address TV interference, cassette deck, CD playback, remote control issues, and cleaning procedures.
