EasyManua.ls Logo

Panasonic SC-BTT405 - Detailed Audio Configuration; Digital Audio Output Formats; HDMI and TV Audio Settings; Speaker and 3 D Sound Settings

Panasonic SC-BTT405
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28
VQT5F60
∫ Surround Effects (> 26)
∫ Sound Effects (> 26)
∫ Dynamic Range Compression
You can listen at low volumes but still hear
dialogue clearly.
(Dolby Digital, Dolby Digital Plus and Dolby
TrueHD only)
≥ “
Auto
” is effective only when playing Dolby
TrueHD.
∫ Digital Audio Output
Press [OK] to show the following settings:
¾ Dolby D/Dolby D +/Dolby TrueHD
¾ DTS/DTS-HD
Select the audio signal to output.
≥
Select “PCM”, when the connected equipment
cannot decode the respective audio format. This
unit decodes the audio format and transmits to
the connected equipment.
≥ If you do not make proper settings the audio
may be static or noisy.
¾ BD-Video Secondary Audio
Select whether or not to mix the primary and
secondary audio (including the button click
sound).
If “Off” is selected, the unit outputs the primary
audio only.
¾ HDMI Audio Output
This setting selects whether or not to output
audio from HDMI.
∫ TV Audio Input
Select the TV audio input to work with the HDMI
CEC operations.
∫ Downmix
Select the downmix system of multi-channel to
2-channel sound.
≥ Select “Surround encoded” to enjoy the
surround sound.
≥ There is no downmix effect on the bitstream
audio signal.
≥ The audio will be output in “Stereo” in the
following cases:
– AVCHD playback
– Dolby TrueHD playback
– Playback of secondary audio (including the
button click sound).
∫ Audio Delay
Synchronization between picture and sound is
corrected by adjusting the delay time of the audio
output.
∫ Speaker
Press [OK] to show the following settings:
¾ Speaker Distance
Set the distance between each speaker and the
seating position.
≥ If you set “Test Tone” to “On”, each speaker
will output a test signal sound in sequence.
¾ Speaker Level
Set the volume of each speaker.
≥ If you set “Test Tone” to “On”, each speaker
will output a test signal sound in sequence.
∫ 3D BD-Video Playback
Select the playback method of 3D compatible
video software.
∫ 3D Playback Precautions
Set to display or hide the 3D viewing warning
screen when playing back the 3D compatible
video software.
∫ Pop-Out Level (> 26)
Audio
3D
SC-BTT466&465&405P-VQT5F60_mst.book 28 ページ 2014年1月15日 水曜日 午後5時36分