Getting started
- 12 -
STEP 2: Preparing the speakers
[BTT880] Front speakers, Surround speakers
1 Attach the stand to the base.
2 Tighten the 3 screws (supplied) securely.
3 Slide the speaker cable into the groove.
4 Attach the speaker.
5 Tighten the screw (supplied) securely.
≥ After connecting the speaker cable (> 13),
press the cable into the groove.
≥ To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
Assembling the speakers
Thread the speaker
cable through the
base.
To Next Page
Loading...
