Panasonic SC-BTT500W

- 48 -
Reference
Specifications
* The impedance of all the speakers is 3 ≠.
* This unit supports “HDAVI Control 5” function.
GENERAL
Power
consumption
Approx. 89 W
Power
consumption in
standby mode
Approx. 0.1 W
(When the other connected devices are
turned off)
Power supply AC 220 V to 240 V, 50 Hz
iPod/iPhone
Connector
DC OUT 5 V 1.0 A MAX
1 system
Dimensions
(WkHkD)
460 mm k 38.7 mm k 279.3 mm
Mass Approx. 2.7 kg
Operating
temperature range
0 oC to 40 oC
Operating humidity
range
35 % to 80 % RH (no condensation)
LASER
Specification
Class 1 LASER Product
Wave length: 790 nm (CDs)/
660 nm (DVDs)/405 nm (BDs)
Laser power:No hazardous
radiation is emitted with the safety
protection
AMPLIFIER SECTION
RMS TTL POWER
OUTPUT
1000 W
1 kHz, 10 % total harmonic distortion
FRONT:
CENTRE:
[BTT500W]
SURROUND:
185 W per ch (3 ≠)
180 W per ch (3 ≠)
125 W per ch (3 ≠)
100 Hz, 10 % total harmonic distortion
SUBWOOFER: 200 W per ch (3 ≠)
Audio Input AUX k 1
Digital Audio Input Optical k 1
Sampling frequency:
32 kHz, 44.1 kHz, 48 kHz
Audio Format:
PCM, Dolby Digital, DTS
FM TUNER SECTION
Frequency range 87.50 MHz to 108.00 MHz (50 kHz
step)
Antenna terminals 75 ≠ (unbalanced)
SPEAKER SECTION
Woofer
CONE TYPE
(cm)
Full range
CONE TYPE
(cm)
Super
tweeter
Piezo type
[BTT880]
Front j 6.5
k 1
Centre j 6.5 k 2
Surround j 6.5 k 1
Subwoofer 16 jj
[BTT500W]
Front j 6.5
k 1
Centre j 6.5 k 2
Surround j 6.5 k 1
Subwoofer 16 jj
Dimensions
(W (mm) k H (mm) k D (mm))
Mass
(Approx. kg)
[BTT880]
Front 270 k1185 k270 2.45
Centre 280 k86 k78 0.67
Surround 270 k1185 k270 2.45
Subwoofer 180 k408 k300 4.3
[BTT500W]
Front 90 k223 k89 0.65
Centre 280 k86 k78 0.67
Surround 80 k143 k75 0.48
Subwoofer 145 k289.5 k258 3.0
TERMINAL SECTION
USB slot USB2.0
2 system
SD card slot Connector
1 system
Ethernet 10BASE-T/100BASE-TX 1 system
Wireless LAN Standard Compliance:
IEEE802.11 b/g/n
Frequency range: 2.4 GHz band
Security: WPA
TM
/WPA2
TM
(Encryption Type: TKIP/AES,
Authentication Type: PSK),
WEP (64 bit/128 bit)
VIDEO SECTION
Signal system PAL/NTSC
HDMI AV output* Output connector:
Type A (19 pin) 1 system
HDMI AV Input* Input connector:
Type A (19 pin) 2 system