Panasonic SC-BTT500W

Getting started
- 13 -
Attach the speaker cable sticker (supplied) and connect the speaker cables to the speakers.
≥ [BTT500W]
When connecting the surround speakers to the wireless system: use the speaker cables A.
When connecting the surround speakers to the main unit: use the speaker cables B.
e.g., [BTT500W] Surround speaker
STEP 3: Connections
Turn off all equipment before connection and read the appropriate operating instructions.
Do not connect the AC mains lead until all other connections are complete.
[BTT880]
[BTT500W] When connecting the surround speakers to the wireless system
Connect the speaker cables to the terminals of the same colour.
Connecting the speaker cables
 
SURROUND
Lch

Push
r: White
s: Blue line
Speaker cable sticker (supplied)
Connector
Speaker indication
Speaker cable sticker Connector
1 FRONT Lch 1 White
2 FRONT Rch 2 Red
3 SURROUND Lch 3 Blue
4 SURROUND Rch 4 Grey
5 CENTER 5 Green
6 SUBWOOFER 6 Purple
Speaker connection
LS / RB LB / RS
SPEAKERS
ENCEINTES
SURROUND (3 - 6 )
AMBIOPHONIQUES
SURR
L
SIDE
R
SIDE
Wireless system
Surround selector
Set in the centre position.