Sound adjustment
Digital remaster is effective on CD (MP3)
Analog remaster is effective on iPod and AUX
This feature reproduces the frequencies lost during
recording to give you a sound closer to the original.
Press [RE-MASTER] during play to select
“ON RE-MASTER”.
Each time you press the button:•
Enables you to enjoy the powerful bass effect.
Press [D.BASS] during play to select “ON D.BASS”.
Each time you press the button:
The actual effect depends on the music source.
•
Enable you to add natural width and depth to the stereo
sound.
To activate
Press [SURROUND] to display “ ” indicator.
To cancel
Press [SURROUND] again to clear “ ” indicator.
Surround sound is less discernible when listening
through headphones.
If interference in FM stereo reception increases, cancel
the surround sound effect.
•
•
Enable you to enjoy lower or higher pitch sound.
Press [BASS/TREBLE] repeatedly to select your
desired setting.
Setting Effect
BASS For lower pitch sound
TREBLE For higher pitch sound
Press [u/t] or [y/i] to adjust the level.
The tone level can be varied within -4 to +4.
Enhancing the bass
Re-master–Enjoying more natural sound
You can change the sound effect by selecting Preset EQ
or adjusting the bass or treble effect.
Selecting sound effects
Press [PRESET EQ] repeatedly to select your desired
setting.
Setting Effect
HEAVY Adds punch to rock
CLEAR Clarifies higher frequencies
SOFT For background music
VOCAL Adds gloss to vocal
FLAT No effect
Preset EQ
Bass or treble
Enjoying surround sound
Note
Note
Note
MP3
You can select the sound input level of your portable
audio equipment.
Press [INPUT LEVEL] repeatedly to select your
desired setting.
Each time you press the button:
Select “NORMAL” if the sound is distorted when level
“HIGH” is activated.
•
Level adjustment (during AUX mode)
To Next Page
Loading...
Need help?
General
