Panasonic SC-HT05

Operations
19
RQT7384
Other functions
(For continental Europe and the United Kingdom)
This unit can display the text data transmitted by the radio data
system (RDS) available in some areas.
“RDS” lights while RDS signals are being received.
RDS displays may not be available if reception is poor.
MULTI CONTROL
1.Press [TOP MENU].
2.Press [< , >] to select “TUNER”.
è [ENTER]
3.Press [< , >] to select “DISPLAY”.
è [ENTER]
4.Press [< , >] to select “RDS PS”, “RDS PTY”, or
“FREQ”.
è [ENTER]
RDS PS: program service, the station name
RDS PTY: program type
FREQ: Frequency display
Note
This unit does not have the emergency broadcast system (EBS)
that tunes automatically into emergency broadcasts.
PTY Displays
RDS broadcasts
NEWS News
AFFAIRS Current affairs
INFO Information
SPORT Sport
EDUCATE Education
DRAMA Drama
CULTURE Culture
SCIENCE Science
VARIED Varied
POP M Pop music
ROCK M Rock music
M. O. R. M Middle-of-the-road Music
LIGHT M Light classical
CLASSICS Serious classical
OTHER M Other music
WEATHER Weather information
FINANCE Finance
CHILDREN Children
SOCIAL A Social affairs
RELIGION Religion
PHONE IN Phone in
TRAVEL Travel
LEISURE Leisure
JAZZ Jazz music
COUNTRY Country music
NATIONAL National music
OLDIES Oldies
FOLK M Folk music
DOCUMENT Documentary
TEST Test broadcast
ALARM Emergency announcement
To change the AM frequency step
(For continental Europe and the United Kingdom)
MULTI CONTROL
1. Press [TOP MENU].
2. Press [< , >] to select “TUNER” è [ENTER]
3. Press [< , >] to select “AM ALLOC” è [ENTER]
4. Press [< , >] to select “9” or “10” è [ENTER]
(The frequency step changes from 9 kHz to 10 kHz.).
MULTI CONTROL
ENTER
TOP MENU
PREV /
NEXT /
RETURN
MULTI CONTROL
TOP MENU
ENTER
PREV /
NEXT /
RETURN
VOLUME
PHONES
DOWN
UP
U
NE TUNE
C
R 2
MULTI CONTROL
ENTER
TOP MENU
PREV /
NEXT /
RETURN
Change this setting to listen to software recorded with Dolby
Digital at low volume (such as late at night) and maintain audio
clarity. It reduces the peak level in loud scenes without affecting
the sound field.
MULTI CONTROL
1.Press [TOP MENU].
2.Press [< , >] to select “OPTION”.
è [ENTER] (“DR COMP” lights.)
è [ENTER]
3.Press [< , >] to select “OFF”, “STANDARD” or
“MAX”.
è [ENTER]
OFF: The software is played with the original dynamic range
(factory setting).
STANDARD: The level recommended by the producer of the
software for household viewing.
MAX: The maximum allowable compression (recommended for
night viewing).
Turn the A/D attenuator on if “OVERFLOW” lights frequently
when using 2-channel analog input.
MULTI CONTROL
1.Press [TOP MENU].
2.Press [< , >] to select “OPTION”.
è [ENTER]
3.Press [< , >] to select “A/D ATT”.
è [ENTER]
4.Press [< , >] to select “ON” or “OFF”.
è [ENTER]
Switch the SPECTRUM display on or off.
MULTI CONTROL
1.Press [TOP MENU].
2.Press [< , >] to select “OPTION”.
è [ENTER]
3.Press [< , >] to select “SPECTRUM”.
è [ENTER]
4.Press [< , >] to select “ON” or “OFF”.
è [ENTER]
Dynamic range compression
A/D attenuator
Spectrum display
SC-HT07EB-EN.fm Page 19 Friday, May 7, 2004 4:29 PM