Panasonic SC-HT05

9
RQT7384
Home theater connections Step 2
OPT 1 OPT 2 COAXIAL
(TV) IN (DVR) IN (DVD) IN
DIGITAL IN
AV1 (TV OUT) AV2 (DVD IN)
AV3 (DVR/VCR1 IN)
SC-HT07
S-VIDEO
MONITOR OUT IN IN IN
TV
DVR / VCR1 DVD
S-VIDEO
IN
S-VIDEO
OUT
21-pin scart cable (not included)
AV1 (TV OUT):
Connect to the 21-pin scart (IN) terminal on a television if
you have connected equipment to AV2 (DVD IN) or AV3
(DVR/VCR1 IN). This unit must be on to output audio/video
signals to the television.
AV2 (DVD IN):
Connect to the 21-pin scart (OUT) terminal on a DVD player.
Change the AV output setting for DVD to “SCART” (
è page 22).
AV3 (DVR/VCR1 IN):
Connect to the 21-pin scart (OUT) terminal on a DVD
recorder or VCR. Change the AV output setting for VCR to
“SCART” (
è page 22). For Q Link* to work, connect to this
terminal.
(For continental Europe and the
United Kingdom)
Used to connect to the S-VIDEO IN terminal on a television.
Used to connect to the
S-VIDEO OUT terminal
on a DVD player.
(For areas other than continental Europe and the
United Kingdom)
S-Video cable (not included)
DVD
player
TV or
monitor
Coaxial cable (not included)
Used to connect to the DIGITAL COAXIAL OUT terminal
on a DVD player to input audio digital signals.
* Q Link (registered trademark of Panasonic)
DATA LOGIC (registered trademark of Metz)
Easy Link (registered trademark of Philips)
Megalogic (registered trademark of Grundig)
SMARTLINK (registered trademark of Sony)
3
2
2
1
R6/LR6, AA, UM-3
VOLUME
INPUT SELECTOR
MUSIC
PHONES
DOWN
UP
AV/MO VE TUNE TUNE
^
SFC
VIDEO IN L AUDIO IN R VCR 2
8
MULTI CONTROL
ENTER
TOP MENU
PREV /
NEXT /
RETURN
Remote control signal sensor
Transmission window
7 meters
The remote control
• Insert so the poles (+ and –) match those in the remote
control.
• Do not use rechargeable type batteries.
Aim at the sensor, avoiding obstacles, at a maximum range of
7 m directly in front of the unit.
Use
Note
• Keep the transmission window and the unit’s sensor free from
dust.
• Operation can be affected by strong light sources, such as
direct sunlight, and the glass doors on cabinets.
Note
• Use digital connection to enjoy Dolby Digital or DTS.
Notes on digital input
This unit can decode the following signals:
• Dolby Digital, DTS
• PCM, including PCM with sampling frequencies of 96
or 88.2 kHz
It cannot decode:
• Other digital signals, such as MPEG
• Dolby Digital RF signals from a laser disc player
(x 1) (x 1)
(x 1)
(x 2)
or or
Supplied
accessories
System cable AC mains lead Remote control transmitter Batteries
Insertion of connector
Even when the connector is perfectly inserted, depending on the type
of inlet used, the front part of the connector may jut out as shown in
the drawing.
However there is no problem using the unit.
Appliance inlet Connector
Approx. 6 mm
Power plug adapter (included) (For areas other than continental
Europe, the United Kingdom, Australia, and New Zealand)
If the power plug does not fit your socket, use this adapter.
SC-HT07EB-EN.fm Page 9 Friday, May 7, 2004 4:29 PM