8
RQT6756
Simple setup
Connecting speakers with the subwoofer
Attach the speaker-cable stickers to make connection easier.
∫ Preventing the speakers from falling over
Connecting speakers with the subwoofer
Attach the speaker-cable stickers to make connection easier.
STEP2
[HT900]
1
2
3
4
5
SUBWOOFER
5 CENTER
_:
`:
2 FRONT (R)
3 SURROUND (L)
4 SURROUND (R)
1 FRONT (L)
Sheet of
speaker-cable
stickers
Click!
Copper
Silver
4-m cable
4 Black
screws
4 Clips
Screw (not included)
String (not included)
Approx. 150 mm
Clip
Screw
[Note]
Consult a qualified building contractor when attaching the speakers to wall.
Improper attachment may result in damage to the wall and speakers.
STEP2
[HT700]
1 FRONT (L)
_:
`:
1
2
3
4
5
2 FRONT (R)
3 SURROUND (L)
4 SURROUND (R)
5 CENTER
SUBWOOFER
Click!
Copper
Silver
Speaker cables
≥3k4-m cables
≥2k10-m cables
Sheet of
speaker-cable
stickers
[Note]
≥Never short-circuit positive (i) and negative (j) speaker wires.
≥Be sure to connect only positive (copper) wires to positive (i)
terminals and negative (silver) wires to negative (j) terminals.
Incorrect connection can damage the speakers.
[HT900] [HT700]
Keeping the cables out of the way
Pass the cables through the holes in the stand to
keep them out of the way.
Stand
1 Pass the cable
through the hole.
2 Pass through the
cutout in the base.
To Next Page
Loading...
