Panasonic SC-HT80 - Disc Playback Options; Angle Selection and Specific Track Playback

Other methods of play
A Switching angles Remote control only
HOB
I
Some DVDs allow you to view the same scene from different
angles.
1 Press [ANGLE] during play.
2 Press [UP/ON or [DOWN/OFF j
to change the angle.
To clear the display |
Press (ANGLE) or [SELECT]. '
ESS I
• “ANGLE” lights up on the unit’s display during scenes with i
multiple angles recorded to indicate this feature Is available. ’
• Some discs allow you to set angles before multi-angle scenes ^
are played. Read the instructions that come with the DVD.
UP/ON
Starting play from a specific track
Remote control only
cvcm r CD
1
2
3
Press [DISC].
Press [1]-[5] to select a disc.
Wail for the disc to change and play to start,
Press the numbered buttons to select
the track.
For tracks numbered 10 or over, press [>10/ENTER] then the
two digits.
Track no. 10: [S10/ENTER][1]— [0]
Track no. 25: [SIO/ENTER] -- [2] — (5]
I2S3
• When playing video CDs with PBC, stop the disc then press
[STOP ■ ] again to cancel playback control, then select the track
number. To restore playback control, stop the disc and press
[MENU].
• There are some video CDs with PBC where this will not work.
RQT5235
Disc
operations