Panasonic SC-HT80 - Speaker Mounting and Placement Considerations; Mounting Options; Television Interference

Speaker set-up
Attaching to a wall
Q To attach vertically
Q To attach horizontally
s:* * Attach four rubber feet to each speaker, ensuring they do not
cover the holes.
The surface you attach the speakers to must be able to support over
10 kg (22 lb.).
Attaching to speaker stands
Ensure the following conditions are met when you purchase
your speaker stands.
• Observe the diameter and length of the screws and the distance
between screws as shown in the diagram.
• The stands must be able to support over 10 kg (22 lb.).
• The stands must be stable even if the speakers are in a high
position.
Moving the brand plate
You can rotate the brand plate if you choose to set up the small
speakers horizontally.
(Prevent damage to the plate by wrapping the end of the
screwdriver with cloth.)
Insert the screwdriver under the plate and lift it. Rotate the plate to
the required position.
If Irregular coloring occurs on your television
These speakers are designed to be used close to a television,
but the picture may be affected with some televisions and set¬
up combinations.
If this occur, turn the television off for about 30 minutes.
The television's demagnetizing function should correct the
problem.
If it persists, move the speakers further away from the
television.
• Set the speakers up on an even surface to prevent them from
falling. Take proper precautions to prevent the speakers from
failing if you cannot set them up on an even surface.
• The speaker nets cannot be removed.
• Keep your speakers at least 10 mm (13/32") away from the
system for proper ventilation.
A
Caution
• Use the speakers only with the
recommended system. Failure to do so
may lead to damage to the amplifier and/or
the speakers, and may result in the risk of
fire. Consult a qualified service person if
damage has occurred or if you experience
a sudden change In performance.
• Do not attempt to attach these speakers to
walls using methods other than those
described in this manual.
RQT5236
Before
use