Panasonic SC-HT800V - VCR Option Settings; On-Screen Display (OSD) Options; Jet Navigator and Tape Settings; Display Brightness

44
RQT6951
Changing settings
While the VCR MENU is displayed
1 Press [3, 4] to select the “OPTION”
and press [ENTER].
2 Press [3, 4] to select the item and
press [2, 1] to change the setting.
To exit the settings screen
Press [MENU] until the screen disappears.
DVD/VCR
DVD
RESET
TV/VIDEO
PA G E
GROUP
PICTURE MODE/
SETUP
REPEAT
PLAY MODE
TV VOLi JET REWTV VOLj
OPEN/CLOSE/EJECT
TOP MENU
NAVI
PROG CANCEL SPEED
CH
CH
OSD/DISPLAY
VOLUME
D.RE-MASTER
SUBWOOFER
POSITION
MEMORY
SUBTITLE ZOOM QUICK REPLAY
C.S.M
SFC
C.FOCUS
SUPER SRND
S.POSITION
MUTING
SLEEP
ÎPL
[SHIFT]
AUDIO
MIX 2CH
TEST
CH SELECT
RETURN
DIRECT
NAVIGATOR
PLAY LIST
MENU
SLOW/SEARCHSKIP
1
100
23
456
78
0
9
TV TUNER
FM/AM REC
ENTER
VCR
S10/ENTER
SHIFT
AUDIO
OSD/DISPLAY
MENU
342 1
ENTER
RESET
VCR
OPTION
OPTION 1/2
OSD ON OFF
TAPE SELECT
T120 T160 T180
BLUE BACK ON OFF
JET NAVIGATOR ON OFF
DELETE NAVIDATA NO YES
JET SEARCH x27 x35
SELECT : s/r:
END :MENU
2 1
≥
≥
≥
≥
≥
≥
OPTION 2/2
MTS MAIN SAP MONO
DISPLAY
BRIGHT DIM OFF
SELECT : s/r:
END :MENU
2 1
≥
≥
34
34
Items Settings (Underlined items are the factory preset.)
OSD (➡ page 45, On-screen display) ON
: Messages appear on the television for about five seconds
after you perform operations.
OFF: Messages do not appear.
TAPE SELECT
Set the length of tape you are using so the unit can show the correct
remaining time.
T120
: T30, T60, T90, T120 tapes
T160: T140, T160 tapes
T180: T180 tapes
BLUE BACK ON
: The screen shows a blue background when you play
unrecorded portions.
OFF
JET NAVIGATOR (➡ page 40) ON: Jet Navigator data automatically registered.
OFF
: Data not registered.
DELETE NAVIDATA
Delete all the Navigation data registered in the unit.
See page 40 to delete data on a single tape.
NO
YES: Then press [ENTER] when you want to delete all the Jet
navigator data.
JET SEARCH (➡ page 34)
Set the speed for JET SEARCH when playing EP and VP tapes.
a27 a
35
Select a27 if the picture is poor at a35.
MTS (➡ page 45, Changing audio)
Set the MTS (Multi-channel Television Sound Stereo) reception
type.
MAIN
: To receive stereo broadcasts.
SAP: To receive SAP when being broadcast.
MONO: To receive monaural broadcasts (e.g., when reception is
poor).
DISPLAY
Set the brightness of the unit's display when the unit is in standby
mode.
BRIGHT: The display is bright all the time.
DIM
: The display dims when the unit is in standby mode.
OFF: The display turns off when the unit is in standby mode.
VCR
6951en.book44ページ２００３年４月４日 金曜日 午後２時２４分