8
RQT6750
Simple setup
Connecting speakers with the subwoofer
Attach the speaker-cable stickers to make connection easier.
∫ Preventing the speakers from falling over ∫ Keeping the cables out of the way
Pass the cables through the holes in the stand to keep them out of
the way.
Connecting speakers with the subwoofer
Attach the speaker-cable stickers to make connection easier.
STEP2
[HT900]
1
2
3
4
5
SUBWOOFER
5 CENTER
_:
`:
2 FRONT (R)
3 SURROUND (L)
4 SURROUND (R)
1 FRONT (L)
Sheet of
speaker-cable
stickers
Click!
Copper
Silver
4-m (13-foot)
cable
4 Black
screws
4 Clips
Screw (not included)
String (not included)
Approx. 150 mm
(5
15
/16q)
Clip
Screw
[Note]
Consult a qualified building contractor when attaching
the speakers to wall. Improper attachment may result in
damage to the wall and speakers.
Stand
1 Pass the cable through
the hole.
2 Pass through the cutout
in the base.
STEP2
[HT700] [HT690]
1 FRONT (L)
_:
`:
1
2
3
4
5
2 FRONT (R)
3 SURROUND (L)
4 SURROUND (R)
5 CENTER
SUBWOOFER
Click!
Copper
Silver
Speaker cables
≥3k4-m (13-foot)
cables
≥2k10-m (33-foot)
cables
Sheet of
speaker-cable
stickers
[Note]
≥Never short-circuit positive (i) and negative (j) speaker wires.
≥Be sure to connect only positive (copper) wires to positive (i)
terminals and negative (silver) wires to negative (j) terminals.
Incorrect connection can damage the speakers.
To Next Page
Loading...
