Panasonic SC-HTB258 User Manual

11
TQBJ2086
Bluetooth
®
connection
You can connect and play an audio device
wirelessly through Bluetooth
®
.
Preparation
• Switch on the main unit.
• Switch on the Bluetooth
®
feature of the device
and put the device near the system.
• Read the operating instructions of the device for
details.
█ Pairing a device
Preparation
If this system is connected to a Bluetooth
®
device,
disconnect it (~right).
1 Press [ -PAIRING].
If the “ ” indicator blinks quickly, continue with
step 3.
2 Press and hold [ -PAIRING] until the “ ”
indicator blinks quickly.
If the “ ” indicator blinks slowly, repeat this
step.
3 Select “SC-HTB258”, “SC-HTB250”,
“SC-HTB208” or “SC-HTB200” from the
Bluetooth
®
menu of the device.
The MAC address (e.g., 6C:5A:B5:B3:1D:0F)
may be shown before “SC-HTB258”,
“SC-HTB250”, “SC-HTB208” or “SC-HTB200”
is shown.
If prompted for a passkey, input “0000” or
“1234”.
Once the Bluetooth
®
device is connected, the
“ ” indicator stops blinking and lights up.
Note:
You can pair up to 8 devices with this system. If a 9th device is
paired, the device that has not been used for the longest time
will be replaced.
█ Connecting a paired device
Preparation
If this system is connected to a Bluetooth
®
device,
disconnect it (~right).
1 Press [ -PAIRING].
2 Select “SC-HTB258”, “SC-HTB250”,
“SC-HTB208” or “SC-HTB200” from the
Bluetooth
®
menu of the device.
█ Disconnecting a device
Press and hold [ -PAIRING] until the “ ”
indicator blinks slowly.
Note:
• This system can only connect to one device at a time.
• When “ ” is selected as the source, this system will
automatically try to connect to the last connected device.
• The Bluetooth
®
device will be disconnected when you select
another source.
Active subwoofer wireless connection
[HTB258] [HTB250]
Preparation
Switch on the main unit.
Check that the wireless link is activated.
WIRELESS LINK indicator
Lights up: The wireless link is activated.
Lights off: The wireless link is not activated.
Blinks: The active subwoofer is trying to activate
the wireless link with the main unit.
Note:
• The wireless link will be activated when the main unit and
the active subwoofer are both switched on.
• The I/D SET button is only used when the main unit is not
paired with the active subwoofer. (~16)
WIRELESS LINK
TQBJ2086_en.fm Page 11 Wednesday, December 27, 2017 2:30 PM
offset printing

Panasonic SC-HTB258 Specifications

General

Cables included	AC
Package type	Box
Package depth	181 mm
Package width	1852 mm
Package height	939 mm
Package weight	29000 g
3D	No
Annual energy consumption	200 kWh
Power consumption (max)	232 W
Power consumption (off)	0.3 W
Power consumption (standby)	0.5 W
Power consumption (typical)	144 W
Screen shape	Flat
Response time	- ms
Display diagonal	65 \
Display brightness	- cd/m²
Display technology	LED
Native aspect ratio	16:9
Display diagonal (metric)	164 cm
Supported graphics resolutions	3840 x 2160
Motion interpolation technology	BMR IFC 1500 Hz
Tuner type	Analog & digital
Analog signal format system	-
Digital signal format system	DVB-C, DVB-S2, DVB-T, DVB-T2, DVB-T2 HD
Sound modes	Cinema, Custom, Dynamic, Game, Sports, Standard
RMS rated power	20 W
Number of speakers	2
Product color	Black
Panel mounting interface	400 x 400 mm
Processor cores	4
HDMI ports quantity	3
DVI-D ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Number of OSD languages	27

Weight and Dimensions

Depth (with stand)	344 mm
Height (with stand)	899 mm
Weight (with stand)	27500 g
Depth (without stand)	78 mm
Width (without stand)	1460 mm
Height (without stand)	844 mm
Weight (without stand)	26000 g