22
VQT4E88
Specifications
1 Specifications are subject to change without notice.
2 Weight and dimensions are approximate.
3 Total harmonic distortion is measured by a digital spectrum
analyzer.
4 Total harmonic distortion is measured by using AES17 filter.
AMPLIFIER SECTION
RMS output power
10 % total harmonic distortion
Subwoofer ch
110 W per channel (100 Hz, 3 ≠)
Front ch (L, R ch)
65 W per channel (1 kHz, 6 ≠)
Total RMS Dolby Digital mode power
240 W
TERMINAL SECTION
HDMI
This unit supports “HDAVI Control 5” function.
HDMI AV input (BD/DVD) 1
Input connector
Type A (19 pin)
HDMI AV output (To TV (ARC)) 1
Output connector
Type A (19 pin)
Digital audio input
Optical (TV, AUX) 2
Sampling frequency
32 kHz, 44.1 kHz, 48 kHz
Audio format
LPCM, Dolby Digital, DTS Digital Surround
Speaker output
(Front L, R) 2
SUBWOOFER SECTION
1 way, 1 speaker system (Bass reflex type)
Woofer 16 cm cone typek1
MAIN UNIT GENERAL
Power consumption 52 W
In standby condition Approx. 0.12 W
(When the other connected devices are turned off)
Power supply
AC 220 to 240 V, 50 Hz
Dimensions (WkHkD)
180 mmk408 mmk305 mm
Mass
5.5 kg
Operating temperature range
0
o
C to 40
o
C
Operating humidity range
20 % to 80 % RH (no condensation)
FRONT SPEAKER
SECTION
1 way, 1 speaker system (Bass reflex type)
Full range
6.5 cm cone typek1
SPEAKER GENERAL
Dimensions (WkHkD)
80 mmk139 mmk71 mm
Mass
0.36 kg k2pcs
SC-HTE50EB_VQT4E88.book 22 ページ ２０１２年２月２４日 金曜日 午後７時５４分
To Next Page