8
VQT4E88
Getting started
Information for your safety
≥ Do not hold the speakers in one hand to avoid injury by dropping the speakers when carrying.
∫ When carrying the active subwoofer
≥ Place the active subwoofer in a horizontal position with the top panel faced upward.
≥ Placing the active subwoofer and the speakers too close to the walls, and corners can result in excessive bass. Cover walls
and windows with thick curtains.
≥ If irregular colouring occurs on your TV, turn the TV off for about 30 minutes. If it persists, move the speakers further away
from the TV.
≥ Keep magnetised items away. Magnetised cards, watches etc., can be damaged if placed too close to the system.
Caution
≥ The active subwoofer and supplied speakers are to be used only as indicated in these instructions. Failure to do so may
lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified service person if
damage has occurred or if you experience a sudden change in performance.
≥ Do not attempt to attach these speakers to a wall using methods other than those described in this manual.
Speaker system
∫ When attaching the speakers to a wall (> 12)
The wall or pillar on which the speakers are to be attached should be capable of supporting 10 kg per screw. Consultation with
a qualified building contractor is recommended when attaching the speakers to a wall. Improper attachment may result in
damage to the wall and speakers, and personal injury.
Active subwoofer
The remote control signal sensor is located on the active subwoofer.
≥ Use the remote control within the correct operation range.
B Do not hold the active subwoofer from this
opening.
The parts inside (speaker unit) may be damaged.
C Always hold the bottom of the active subwoofer when
moving it.
A
A Remote control signal sensor
≥ Remote control operation range
Distance: Within approx. 7 m directly in
front
Angle: Approx. 30
o
left and right
HTE50EB~Body_mst.fm 8 ページ ２０１２年３月１日 木曜日 午後２時３１分
To Next Page