EasyManua.ls Logo

Panasonic SC-HTX5

Panasonic SC-HTX5
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
RQT9478
16
Play
Enjoying movies and music
Turn on the TV and switch its input to match the connection (HDMI, for example) using the TV’s
remote control.
Enjoying movies and music
TV : TV
BD/DVD : Blu-ray Disc player/DVD recorder
AUX 1 : AUX1 terminal
AUX 2 : AUX2 terminal
AUX 3 : AUX3 terminal
AUX 4 : AUX4 terminal
“AUX 1”, “AUX 2”, “AUX 3” and “AUX 4” switch every
time you press [AUX].
To turn on the system
Press the button.
1
2
3
4
After playback, reduce the volume level and turn off.
To select the source
Press one of these buttons.
Start play on the connected equipment.
You can enjoy the variety of surround effects. ( page 17)
To adjust the volume
Press the buttons.
or
or
Adjustment range: 0 (Min) to 50 (Max)
VOLUME
WHISPER-MODE
SURROUND
INPUT
SELECTOR
1
Turn on the system.
TV : TV
BD/DVD : Blu-ray Disc player/
DVD recorder
AUX 1 : AUX1 terminal
AUX 2 : AUX2 terminal
AUX 3 : AUX3 terminal
AUX 4 : AUX4 terminal
Operation on the control panel
2
Select the source.
3
Start play on the connected
equipment.
4
To adjust the volume.
Control panel (
page 5)
See page 24 for digital signals that can be played on this system.
Depending on the playback signal, you may feel the volume of subwoofer or surround speakers (when used page
14) is not balanced with the volume of the front speakers. In this case, you can adjust the speaker volume during
playback. ( page 20)
Even if you switch input to “TV ”, images (or audio) of the equipment connected to BD/DVD IN terminal or AUX1
terminal are output from TV OUT terminal. When the equipment is connected to both BD/DVD IN terminal and AUX1
terminal, signals of equipment whose input is lastly selected are output.
When using a DVD recorder with built-in VCR (with the DVD output terminal and DVD/VHS output terminal
mounted), select the input as follows in step 2 above.
To enjoy DVD (when connected to AUX2): select “AUX 2 ”.
To enjoy video (when connected to AUX4): select “AUX 4 ”.
Press
(The input source
switches each time you
press the button.)
Press
Press
Preparation
INPUT
SELECTOR
VOLUME
Note

Table of Contents

Related product manuals