Panasonic SC-PM07

CM
o
■ /•DEMO
b
; :
: t_ CJ x; ■
jfl
*
! h t n Tt 1 ci r~ ;
; y v lj At t 3 /_
OPEN/CLOSE A
id IE Hddd
,>r ij..
Recording CDs
Normal recording
• Tracks are recorded in the order in which they are found
on the CD.
• Tracks are cut in the middle when the end of the tape is
reached.
• You can record from any point on the tape.
1 Insert the cassette with the exposed tape
facing left.
2 Press [ ■ /-DEMO] to select the CD mode.
3 Press [OPEN/CLOSE ±] to open the CD tray.
Insert the CD with label facing upward.
Press [OPEN/CLOSE ±] to close the CD tray.
4 Press [•REC/II] to start recording.
The recording will start from the first track.
To stop recording
Press P/-DEMO].
The recording and the CD will stop.
To stop recording temporarily
Press [•REC/II],
To resume recording, press [•REC/II].
To record from a specific point on a tape
Before recording, advance the tape to the point from where
you want to start recording.
To record programmed tracks
© After step 3, program the track(s) you want (>4 steps 2-4
on page 14).
© Press [•REC/II] to start recording.
17
RQT6096
Recording
operations